Features
1.Low heat storage;
2.Resistant to Non-Ferrous Metals;
3.Excellent resistance to thermal shock and chemical attack;
4.Resists oxidation and reduction;
5.High mechanical strength at high temperature;
6.Can be machined, cut and shaped easily
7.High rigidity and light weight
Ceramic fiber board is a high-performance insulating product formed by ceramic fiber and adhesive in vacuum. It is flat, ceramic materials are evenly distributed, and has excellent heat insulation performance. Due to its low thermal conductivity and low heat storage, no inflation during heating can reduce energy cost and cycle time, and protect the refractory surface from thermal shock and chemical attack. Therefore, it is an ideal product for fire resistance, heat insulation and heat insulation.
| Category (类别) | Medium Density (中等密度) | High Density (高密度) |
|---|---|---|
| Density (D) [g/cm³] (密度 D（克 / 立方厘米）) | 1.2 ≤ D ≤ 1.4 | D > 1.4 |
| Thermal Conductivity [W/(m・K)] (热导率 W/(m・K)) | ≤ 0.3 | ≤ 0.35 |
| Flexural Strength (抗弯强度) | ≥ 12 MPa (兆帕) | ≥ 16 MPa (兆帕) |
| Moisture Content (水分含量) | ≤ 10% | ≤ 10% |
| Water Swell Rate (水膨胀率) | ≤ 0.25% | ≤ 0.25% |
| Thermal Shrinkage Rate (热收缩率) | ≤ 0.50% | ≤ 0.50% |
| Non-Combustibility (不燃性) | Class A1 Non-Combustible Material (A1 级不燃材料) | Class A1 Non-Combustible Material (A1 级不燃材料) |
| Thickness (mm) (厚度（毫米）) | Length × Width (mm) (长 × 宽（毫米）) | Surface (表面) |
|---|---|---|
| 4 | 2440×1220
3000×1200 1200×600 600×600 Other sizes available upon request (可根据要求提供其他尺寸) |
Optional single-side/double-side sanding and chamfering (可选单面 / 双面打磨和倒角) |
| 5 | Same as above (同上) | Same as above (同上) |
| 6 | Same as above (同上) | Same as above (同上) |
| 8 | Same as above (同上) | Same as above (同上) |
| 9 | Same as above (同上) | Same as above (同上) |
| 10 | Same as above (同上) | Same as above (同上) |
| 12 | Same as above (同上) | Same as above (同上) |
| 15-35 | Same as above (同上) | Same as above (同上) |
